 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| General purpose small signal amplifier (50V, 0.15A) 2SC4617EB Features 1) Excellent hFE linearity. 2) Complements the 2SA1774EB. Structure NPN silicon epitaxial planar transistor Dimensions (Unit : mm) EMT3F 1.6 0.26 1.6 0.86 0.37 0.7 0.45 (3) (1) 0.5 0.5 1.0 (2) 0.13 (1) Base (2) Emitter (3) Collector = Denotes hFE Each lead has same dimensions Abbreviated symbol : B Absolute maximum (Ta=25C) Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Range of storage temperature 1 Pw=1ms Single pulse 2 Each terminal mounted on a recommended land Symbol VCBO VCEO VEBO IC ICP PD Tj Tstg 1 2 Limits 60 50 7 150 200 150 150 -55 to +150 Unit V V V mA mW C C Electrical characteristics (Ta=25C) Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Output capacitance Symbol BVCEO BVCBO BVEBO ICBO IEBO VCE(sat) hFE fT Cob Min. 50 60 7 - - - 120 - - Typ. - - - - - - - 180 2 Max. - - - 100 100 400 390 - 3.5 Unit V V V nA nA mV - MHz pF IC=1mA IC=50A IE=50A VCB=60V VEB=7V IC/IB=50mA/5mA VCE=6V, IC=1mA VCE=12V, IE=-2mA, f=100MHz VCE=12V, IE=0A, f=1MHz Conditions hFE rank categories Rank hFE Q 120 to 270 R 180 to 390 www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 1/3 2009.12 - Rev.C 0.45 0.37 2SC4617EB Electrical characteristic curves 50 100 Data Sheet COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) VCE=6V 80 Ta=25C COLLECTOR CURRENT : IC (mA) 20 10 5 Ta=100C 25C -55C 0.50mA mA 0.45 A 0.40m mA 0.35 0.30mA 10 Ta=25C 30A 27A 8 24A 21A 60 0.25mA 0.20mA 6 18A 15A 2 1 0.5 0.2 0.1 0 40 0.15mA 0.10mA 4 12A 9A 20 0.05mA IB=0A 0 0.4 0.8 1.2 1.6 2.0 2 6A 3A 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 BASE TO EMITTER VOLTAGE : VBE (V) 0 0 4 8 IB=0A 12 16 20 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.1 Grounded emitter propagation characteristics Fig.2 Grounded emitter output characteristics ( ) Fig.3 Grounded emitter output characteristics ( ) 500 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) Ta=25C 500 Ta=100C VCE=5V 3V 1V DC CURRENT GAIN : hFE VCE=5V 0.5 Ta=25C DC CURRENT GAIN : hFE 200 200 25C -55C 0.2 IC/IB=50 20 10 100 100 0.1 0.05 50 50 0.02 20 10 0.2 20 10 0.2 0.5 1 2 5 10 20 50 100 200 0.5 1 2 5 10 20 50 100 200 0.01 0.2 0.5 1 2 5 10 20 50 100 200 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current ( ) Fig.5 DC current gain vs. collector current ( ) Fig. 6 Collector-emitter saturation voltage vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 0.5 IC/IB=10 0.5 IC/IB=50 TRANSITION FREQUENCY : fT (MHz) 500 Ta=25C VCE=6V 0.2 Ta=100C 25C -55C 0.2 0.1 0.05 Ta=100C 25C -55C 0.1 0.05 200 0.02 0.02 0.01 0.2 0.5 1 2 5 10 20 50 100 100 0.01 0.2 0.5 1 2 5 10 20 50 100 200 50 -0.5 -1 -2 -5 -10 -20 -50 -100 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) EMITTER CURRENT : IE (mA) Fig.7 Collector-emitter saturation voltage vs. collector current ( ) Fig.8 Collector-emitter saturation voltage vs. collector current () Fig.9 Gain bandwidth product vs. emitter current www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 2/3 2009.12 - Rev.C 2SC4617EB BASE COLLECTOR TIME CONSTANT : Cc*rbb' (ps) Data Sheet COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) 20 10 Cib Ta=25C f=1MHz IE=0A IC=0A 200 Ta=25C f=32MHZ VCB=6V 100 5 50 2 Co 20 b 1 0.2 0.5 1 2 5 10 20 50 10 -0.2 -0.5 -1 -2 -5 -10 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) EMITTER CURRENT : IE (mA) Fig.10 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage Fig.11 Base-collector time constant vs. emitter current www.rohm.com c 2009 ROHM Co., Ltd. All rights reserved. 3/3 2009.12 - Rev.C Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2009 ROHM Co., Ltd. All rights reserved. R0039A |
Price & Availability of 2SC4617EB09
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |